岳彩旭 教授[博导]

发布者:机械学院发布时间:2014-02-04浏览次数:2866

1.基本信息

  岳彩旭,男,19827月出生,博士,教授,博士生导师,黑龙江省优秀硕士论文获得者。主要从事硬态切削理论、切削过程建模及硬态加工工艺优化等方面的研究。目前主持国家自然科学基金、黑龙江省自然基金、黑龙江省教育厅科技项目各1项。参于完成了国家863重点项目、国家自然基金重点项目、黑龙江省自然基金重点项目和科技数控专项项目等多项项目。已发表学术论文30余篇,其中1篇论文SCI收录,14篇论文被EI收录,7篇被ISTP收录。主编著作1部,参与编写著作3部。目前在读硕士研究生8名。学术兼职主要为黑龙江省刀具技术协会理事,国家自然科学基金委函评专家。

 

2.研究领域

  主要从事硬态切削理论、切削过程建模及硬态铣削工艺优化等方面的研究

 

3.联系方式

  单位:哈尔滨理工大学-机械动力工程学院-高效切削及刀具国家地方联合工程实验室

  地址:黑龙江省哈尔滨市学府路52号哈尔滨理工大学92信箱,邮编:150080

  电话:0451-8639058313654583962

Email:yuecaixu@163.comyuecaixu@hrbust.edu.cn

 

4.工作经历

起讫时间

工作单位

任职部门

任职

2010.72012.7

哈尔滨理工大学

机械动力工程学院

助教

2012.72013.7

哈尔滨理工大学

机械动力工程学院

讲师

2013.7~至今

哈尔滨理工大学

机械动力工程学院

副教授

 

5.教育经历

起讫时间

毕业院校

专业

学位

2003.92007.7

哈尔滨理工大学

机械设计及其自动化

学士

2007.92010.4

哈尔滨理工大学

机械设计及其自动化

硕士

2009.92013.5

哈尔滨理工大学

机械设计及其自动化

博士

2014.5~至今

哈尔滨工程大学

机械设计及其自动化

博士后

 

6.学术兼职

起讫时间

兼职单位

任职

2012.9~至今

黑龙江省刀具技术协会

理事

2013.9~至今

International Journal of Mechanical Sciences杂志

审稿人

2013.9~至今

哈尔滨理工大学学报

审稿人

 

8.教育教学

金属切削刀具及原理超硬刀具先进制造技术先进制造工艺技术数控加工工艺及设备数控技术

 

9.教学项目[近五年]

项目名称

项目来源

起讫时间

承担角色

先进制造工艺技术教学手段创新研究

哈理工

2013年~2014

负责人

 

10.科研项目[近五年]

项目名称

项目来源

起讫时间

承担角色

项目类别

高速切削高强度钢加工表面淬火效应及强化机理(51105119

国家自然基金委

2012-2014

 

负责人

国家自然基金青年项目

大曲率拼接模具硬态铣削过程瞬态突变的柔化处理(E201307

黑龙江省科技厅

2014-2016

负责人

黑龙江省自然基金面上项目

汽车覆盖件淬硬钢模具高速加工技术研究(1252198

黑龙江省教育厅

2012-2014

负责人

黑龙江省教育厅项目

钛合金加工过程建模及工艺优化

航天科工哈尔滨风华有限公司

2010-2011

负责人

横向项目

轿车覆盖件用淬硬钢模具高效刀具"设计-制造-评价"基础研究

国家教育部

2014-2016

第二参与者

教育部博士点基金

典型难加工材料功能形面零件多轴联动加工基础研究(E201307

黑龙江省科技厅

2011-2013

第二参与者

黑龙江省自然基金重点项目

钛合金、高温合金加工用可转位刀具及超硬刀具(2010ZX04012-21

国家工信部

2010-2012

第二参与者

国家科技重大专项子项目

淬硬钢高速精密车削过程的优化研究(50875068

国家自然基金委

2009-2011

主要参与者

国家自然科学基金面上项目

硬态干式切削时的临界硬度和金属软化效应研究(51075108

国家自然基金委

2011-2013

主要参与者

国家自然基金面上项目

 

11.奖项成果[近五年]

奖项名称

获奖年份

完成人

所获奖项

排名

哈尔滨理工大学机械学院青年教师课堂教学竞赛

201411

岳彩旭

一等奖

1

黑龙江省自然科学技术学术成果

20116

刘献礼、陈光军、岳彩旭

三等奖

3

黑龙江省第七届优秀硕士学位论文

20126

岳彩旭

优秀

1

哈尔滨理工大学机械学院青年教师课堂教学竞赛

201212

岳彩旭

优秀奖

1

 

12.论文期刊[近五年]

[1]Caixu Yue, Xianli Liu, Jing Ma, Zhaojing Liu. Hardening effect on machined surface for precise hard cutting process with consideration of tool wear. Chinese Journal of Mechanical Engineering.2014(6):1-9(SCI,EI)

[2]Yue Caixu, Yang Yongheng, Liu Fei. Deteriorative Layer Formation on Machined Surface in Precision Hard Cutting Process. Nanotechnology and Precision Engineering,2014(3):222-226

[3]CX Yue, FG Yan, LB Li, HY You, QJ Yu. Parametric design of ball-end milling tools for high speed milling Key Engineering Materials, 2014(800-801):484-488(EI:20143418082750)

[4]Cai Xu Yue, Fu Gang Yan. An investigation of wear of ball end milling cutter for high-speed milling of hardened. Key Engineering Materials. 2014(800-801): 475-478(EI:20143418082748)

[5]CX Yue, ZN Zhong, MM Yu. High-speed cutting finite element model parametric modeling based on ABAQUS.Key Engineering Materials. 2014(800-801): 353-357(EI:20143418082726)

[6]Cai Xu Yue, Yong Heng Yang. Experiment and simulation of hard cutting system dynamic characteristics. Key Engineering Materials. 2014 (609-610):1478-1482(EI:20142117739277)

[7]Cai Xu Yue, Study of surface residual stress in hard turning of die steel Cr12MoV.Key Engineering Materials.2014 (589-590): 33-37(EI:20135117092448)

[8]Cai Xu Yue, Da Qu, Yong Heng Yang. Study of impact of tool wear on stable region for die steel cutting process. Key Engineering Materials.2013(589-590): 204-208(EI:20135117092478)

[9]Caixu Yue.Xianli Liu. Research on machined surface quality of high speed hard machining for harden steel. Advanced Materials Research Vol. 500 (2012) pp 82-88(EI:20122015018555)

[10]   Yue Caixu,Liu Xianli,Yan Fugang,Zhai. Simulation and Experimental Study of Saw Tooth Chip Formation Under Different Cutting Edges Preparation. Mechanical Science And Technology For Aerospace Engineering. 2011(4):44-48.

 

参加国际学术会议情况:

[1]200710月参加了第九届切削与先进制造学术会议,会议地点为哈尔滨;

[2]201006月参加第四届高速切削国际学术会议,会议地点为上海,在会上宣读了论文;

[3]201008月参加了第九届海内外青年设计与制造科学会议,会议地点为长沙;

[4]201110月参加了第九届切削与先进制造学术会议,会议地点为济南;

[5]201110月参加了第十六届全国残余应力学术会议暨国际残余应力研讨会,会议地点为西安;

[6]201110月参加了第十四届国际制造工程与管理会议(IMCC2011),会议地点为天津;

[7]201206月参加了第十届亚太地区材料加工国际会议地点为济南;

[8]201208月参加了第五届高速切削国际学术会议,会议地点为济南,在会上宣读了了论文;

[9]201210月参加了第五届现代切削与测量工程国际研讨会,会议地点为成都;

[10]   201307月参加了第十一届切削与先进制造学术会议,会议地点为厦门;

13.出版专著

[1]UG NX 9.0 从入门到精通》,主编,中国铁道出版社,201411

[2]《数控刀具选用指南》,副主编,机械工业出版社,20144

[3]《理论力学》,副主编,东北大学出版社,20146

[4]《数控刀具选用指南》,副主编,延边大学出版社,20144

 

Curriculum Vitae

Caixu Yue, Ph.D.

School of Mechanical and Power Engineering, HarbinUniversity of Science and Technology

No 1. Building Rm. 1223, 52 Xuefu Road Nangang District, Harbin, Heilongjiang, China

National &Local United Engineering Lab of "High-Efficiency Cutting and Tools"

Phone: +86 (0451) 8639-0583, Fax: +86 (0451) 8639-0502

 E-mail: yuecaixu@163.com, yuecaixu@hrbust.endu.cn

EDUCATION

Ph.D., Mechanical Engineering, HarbinUniversity of Science and Technology, China, 2013

      Dissertation Title: “Tool Wear and Surface Quenching Mechanism for Hard Cutting Process”

Advisor: Xianli Liu, Professor and Director of National &Local United Engineering Lab

M.S., Mechanical Engineering, HarbinUniversity of Science and Technology, China, 2010

Thesis Title: “Finite element simulation of cutting hardened steel with high speed”

Advisor: Xianli Liu, Professor and Director of National &Local United Engineering Lab

B.S., Mechanical Engineering, HarbinUniversity of Science and Technology, China, 2007

EXPERIENCE

Associate Professor    School of Mechanical and Power Engineering, Harbin University of Science and Technology, Harbin, 07/2013 – present

Lecturer             School of Mechanical and Power Engineering, HarbinUniversity of Science and Technology, Harbin, 07/2012 –06/2013

Assistant Professor    School of Mechanical and Power Engineering, HarbinUniversity of Science and Technology, Harbin, 07/2010 –06/2012

AWARDS AND HONORS

2013      Excellent Thesis, 12th Conference On Machining & Advanced Manufacturing Technology

2012     Three Prize of Natural Science in Academic Achievement, Science and technology academic achievements award evaluation committee of Heilongjiang province

2011    Outstanding Master's Thesis in HeilongjiangProvince,Education Department of HeilongjiangProvince

PUBLICATIONS

PATENTS

[1]     {C}{C}{C}{C}{C}Super Hard Cutting Tool for High-Strength Steel Machining, Chinese patent number CN203316752U (Caixu Yue, Jing Ma, etc)

[2]     {C}{C}{C}{C}{C}Tool clamping device for machining center spindle, Chinese patent number CN203592338U (Caixu Yue, Yongheng Yang, etc)

BOOKS

[1]     {C}{C}{C}{C}{C}Tool Selection Guide for NC Cutting Tool, Edited by Xianli Liu and Caixu Yue,China Machine Press, ISBN:9787111460633,(April 2014),Hardback 860pp

[2]     {C}{C}{C}{C}{C}Theoretical Mechanics, Edited by Jun Zhou, Yaqin Li and Caixu Yue. Northeastern University Press, ISBN:9787551706780,(May 2014),330pp

REFEREED JOURNAL ARTICLES

[1]     {C}{C}{C}{C}{C}Caixu Yue, Xianli Liu, Jing Ma, Zhaojing Liu. Hardening effect on machined surface for precise hard cutting process with consideration of tool wear. Chinese Journal of Mechanical Engineering.2014(6):1-9(SCI,EI)

[2]     {C}{C}{C}{C}{C}Yue Caixu, Yang Yongheng, Liu Fei. Deteriorative Layer Formation on Machined Surface in Precision Hard Cutting Process. Nanotechnology and Precision Engineering,2014(3):222-226

[3]     {C}{C}{C}{C}{C}CX Yue, FG Yan, LB Li, HY You, QJ Yu. Parametric design of ball-end milling tools for high speed milling Key Engineering Materials, 2014(800-801):484-488(EI:20143418082750)

[4]     {C}{C}{C}{C}{C}Cai Xu Yue, Fu Gang Yan. An investigation of wear of ball end milling cutter for high-speed milling of hardened. Key Engineering Materials. 2014(800-801): 475-478(EI:20143418082748)

[5]     {C}{C}{C}{C}{C}CX Yue, ZN Zhong, MM Yu. High-speed cutting finite element model parametric modeling based on ABAQUS.Key Engineering Materials. 2014(800-801): 353-357(EI:20143418082726)

[6]     {C}{C}{C}{C}{C}Cai Xu Yue, Yong Heng Yang. Experiment and simulation of hard cutting system dynamic characteristics. Key Engineering Materials. 2014 (609-610):1478-1482(EI:20142117739277)

[7]     {C}{C}{C}{C}{C}Cai Xu Yue, Study of surface residual stress in hard turning of die steel Cr12MoV.Key Engineering Materials.2014 (589-590): 33-37(EI:20135117092448)

[8]     {C}{C}{C}{C}{C}Cai Xu Yue, Da Qu, Yong Heng Yang. Study of impact of tool wear on stable region for die steel cutting process. Key Engineering Materials.2013(589-590): 204-208(EI:20135117092478)

[9]     {C}{C}{C}{C}{C}Caixu Yue.Xianli Liu. Research on machined surface quality of high speed hard machining for harden steel. Advanced Materials Research Vol. 500 (2012) pp 82-88(EI:20122015018555)

[10]{C}{C}{C}{C}{C}Yue Caixu,Liu Xianli,Yan Fugang,Zhai. Simulation and Experimental Study of Saw Tooth Chip Formation Under Different Cutting Edges Preparation. Mechanical Science And Technology For Aerospace Engineering. 2011(4):44-48.

[11]{C}{C}{C}{C}{C}C.X. Yue, X.L. Liu, Z.Y. Zhao, K.Q. Li and T.Y. Ma. Finite Element Simulation of Heavy Cutting Process. Advanced Materials Research, 2011, 188: 617-622. (EI: 20111913971716)

[12]{C}{C}{C}{C}{C}C. X. Yue, X. L. Liu, Y. S. Zhai. FEM of Saw Tooth Chip Formation under Different Cutting Edge Preparation. key engineering materials.( EI:20102613032423)

[13]{C}{C}{C}{C}{C}C.X.Yue, X.L.Liu and G.J. Chen. Experiment and Forecast Research of Hard Cutting Surface Roughness. Journal of Harbin Institute of Technology, 2010, 17:224-227.(EI:20102413004178)

[14]{C}{C}{C}{C}{C}Caixu Yue, Xianli Liu, Dongkai Jia. 3D Finite Element Simulation of Hard Turning. Advanced Materials Research, 2009, vol 69-70, p11-15. (EI: 20094512423220)

[15]{C}{C}{C}{C}{C}Caixu Yue, Xianli Liu, Hongmin Pen. 2D FEM Estimate of Tool Wear in Hard Cutting Operation: Extractive of interrelated parameters and tool wear simulation result. Advanced Material Research. Advanced Material Research, 2009, vol 69-70, p316-321. (EI: 20094512423281)

FUNDED RESEARCH GRANTS

[1]     {C}{C}{C}{C}{C}Harden effect on machined Surface for high speed cutting high strength steel (51105119). Natural Science Foundation of China, 1/2012-12/2014. ¥270000.

[2]     {C}{C}{C}{C}{C}Soft treatment of transient change in high milling of high strength steel (E201307),Natural Science Foundation of Heilongjiang province, 1/2014-12/2016. ¥50000.

[3]     {C}{C}{C}{C}{C}Research of high speed machining technology of hardened steel die for automobile cover parts(1252198). Natural Science Foundation of Heilongjiang province Education Department, 1/2012-12/2014.¥20000.

MEMBER OF ORGANIZING COMITTEES OF CONFERENCES

[1]     {C}{C}{C}{C}{C}Member of the Organization Committee of the 6th High Speed Machining Conference, July 24-26, 2014, Harbin, China.

[2]     {C}{C}{C}{C}{C}Member of the Voluntary Association of the 7th conference on machining & advanced manufacturing technology, August,14-16,2007, Harbin, China.

REVIEWER FOR THE FOLLOWING JOURNALS

[1]     {C}{C}{C}{C}{C}Reviewer for International Journal of Mechanical Sciences

[2]     {C}{C}{C}{C}{C}Journal of HarbinUniversity of Science and Technology